* When cutting Phenolic Face Board, we recommend that you re-seal the cut edges with an acrylic paint
Birch plywood (Riga Ply) bonded with waterproof phenol resin adhesive and overlaid on both the sides with a phenol film (grade F/F).
Normally dark brown
2440 x 1220mm x 15mm
Environmentally friendly, durable, workable, hygienic, not smelling and don’t give taste to food-stuff, easy to clean, wear-proof, weather and water-proof, resists commonly used chemicals. Riga Form for shuttering can be re-used many times.
Plywood is glued with waterproof phenol formaldehyde resin adhesive. Bonding is resistant to weather and boiling water. It meets requirements of the following standards:EN 314 / 3rd class; BS 1203 / H4 (previously WBP); DIN 68705 Part 3 / type BFU 100.
In accordance with the standard EN 13986 formaldehyde emission meets the Class E1 requirements. Test method EN 717 Part 2.OverlayingA smooth phenol film, which is hot-pressed onto the surface, is used as an overlay.
The film is composed of a base paper and phenol resin that is impregnated into the base paper. Film weights 120g/m2, ~170g/m2, 220g/m2.
Overlaying with higher resistance to abrasion and multi-layer overlaying are also possible (respectively 240g/m2, 440g/m2 etc.).
Multi-layer overlaying gives superior wear resistance.Overlaying characteristicsOverlaying surface is smooth, glossy and hard.
It withstands abrasion, it is weather and moisture proof and resists commonly used chemicals, dilute acids and alkalis. T
he surface is easy to clean with water or steam wash.